Arc (lv_arc)

Overview

The Arc consists of a background and a foreground arc. The foreground (indicator) can be touch-adjusted.

Parts and Styles

LV_PART_MAIN Draws a background using the typical background style properties and an arc using the arc style properties. The arc's size and position will respect the padding style properties.
LV_PART_INDICATOR Draws another arc using the arc style properties. Its padding values are interpreted relative to the background arc.
LV_PART_KNOB Draws a handle on the end of the indicator using all background properties and padding values. With zero padding the knob size is the same as the indicator's width. Larger padding makes it larger, smaller padding makes it smaller.

Usage

Value and range

A new value can be set using lv_arc_set_value(arc, new_value). The value is interpreted in a range (minimum and maximum values) which can be modified with lv_arc_set_range(arc, min, max). The default range is 0..100.

The indicator arc is drawn on the main part's arc. This if the value is set to maximum the indicator arc will cover the entire "background" arc. To set the start and end angle of the background arc use the lv_arc_set_bg_angles(arc, start_angle, end_angle) functions or lv_arc_set_bg_start/end_angle(arc, angle).

Zero degrees is at the middle right (3 o'clock) of the object and the degrees are increasing in clockwise direction. The angles should be in the [0;360] range.

Rotation

An offset to the 0 degree position can be added with lv_arc_set_rotation(arc, deg).

Mode

The arc can be one of the following modes:

LV_ARC_MODE_NORMAL The indicator arc is drawn from the minimum value to the current.
LV_ARC_MODE_REVERSE The indicator arc is drawn counter-clockwise from the maximum value to the current.
LV_ARC_MODE_SYMMETRICAL The indicator arc is drawn from the middle point to the current value.

The mode can be set by lv_arc_set_mode(arc, LV_ARC_MODE_...) and used only if the angle is set by lv_arc_set_value() or the arc is adjusted by finger.

Change rate

If the arc is pressed the current value will set with a limited speed according to the set change rate. The change rate is defined in degree/second unit and can be set with lv_arc_set_change_rage(arc, rate)

Knob offset

Changing the knob offset allows the location of the knob to be moved relative to the end of the arc The knob offset can be set by lv_arc_set_knob_offset(arc, offset_angle), will only be visible if LV_PART_KNOB is visible

Setting the indicator manually

It's also possible to set the angles of the indicator arc directly with lv_arc_set_angles(arc, start_angle, end_angle) function or lv_arc_set_start/end_angle(arc, start_angle). In this case the set "value" and "mode" are ignored.

In other words, the angle and value settings are independent. You should exclusively use one or the other. Mixing the two might result in unintended behavior.

To make the arc non-adjustable, remove the style of the knob and make the object non-clickable:

lv_obj_remove_style(arc, NULL, LV_PART_KNOB);
lv_obj_remove_flag(arc, LV_OBJ_FLAG_CLICKABLE);

Advanced hit test

If the LV_OBJ_FLAG_ADV_HITTEST flag is enabled the arc can be clicked through in the middle. Clicks are recognized only on the ring of the background arc. lv_obj_set_ext_click_size() makes the sensitive area larger inside and outside with the given number of pixels.

Place another object to the knob

Another object can be positioned according to the current position of the arc in order to follow the arc's current value (angle). To do this use lv_arc_align_obj_to_angle(arc, obj_to_align, radius_offset).

Similarly lv_arc_rotate_obj_to_angle(arc, obj_to_rotate, radius_offset) can be used to rotate the object to the current value of the arc.

It's a typical use case to call these functions in the VALUE_CHANGED event of the arc.

Events

LV_EVENT_VALUE_CHANGED sent when the arc is pressed/dragged to set a new value.
LV_EVENT_DRAW_PART_BEGIN and LV_EVENT_DRAW_PART_END are sent with the following types:
- LV_ARC_DRAW_PART_BACKGROUND The background arc.
  - part: LV_PART_MAIN
  - p1: center of the arc
  - radius: radius of the arc
  - arc_dsc
- LV_ARC_DRAW_PART_FOREGROUND The foreground arc.
  - part: LV_PART_INDICATOR
  - p1: center of the arc
  - radius: radius of the arc
  - arc_dsc
- LV_ARC_DRAW_PART_KNOB The knob
  - part: LV_PART_KNOB
  - draw_area: the area of the knob
  - rect_dsc:

See the events of the Base object too.

Learn more about Events.

Keys

LV_KEY_RIGHT/UP Increases the value by one.
LV_KEY_LEFT/DOWN Decreases the value by one.

Learn more about Keys.

Example

Simple Arc

A simple example to demonstrate the use ofan arc.

#include "../../lv_examples.h"

#if LV_USE_ARC && LV_BUILD_EXAMPLES

static void value_changed_event_cb(lv_event_t * e);

void lv_example_arc_1(void)
{
    lv_obj_t * label = lv_label_create(lv_screen_active());

    /*Create an Arc*/
    lv_obj_t * arc = lv_arc_create(lv_screen_active());
    lv_obj_set_size(arc, 150, 150);
    lv_arc_set_rotation(arc, 135);
    lv_arc_set_bg_angles(arc, 0, 270);
    lv_arc_set_value(arc, 10);
    lv_obj_center(arc);
    lv_obj_add_event(arc, value_changed_event_cb, LV_EVENT_VALUE_CHANGED, label);

    /*Manually update the label for the first time*/
    lv_obj_send_event(arc, LV_EVENT_VALUE_CHANGED, NULL);
}

static void value_changed_event_cb(lv_event_t * e)
{
    lv_obj_t * arc = lv_event_get_target(e);
    lv_obj_t * label = lv_event_get_user_data(e);

    lv_label_set_text_fmt(label, "%d%%", lv_arc_get_value(arc));

    /*Rotate the label to the current position of the arc*/
    lv_arc_rotate_obj_to_angle(arc, label, 25);
}

#endif

def value_changed_event_cb(e,label):
    arc = e.get_target_obj()

    txt = "{:d}%".format(arc.get_value())
    label.set_text(txt)

    # Rotate the label to the current position of the arc
    arc.rotate_obj_to_angle(label, 25)

label = lv.label(lv.screen_active())

# Create an Arc
arc = lv.arc(lv.screen_active())
arc.set_size(150, 150)
arc.set_rotation(135)
arc.set_bg_angles(0, 270)
arc.set_value(10)
arc.center()
arc.add_event(lambda e: value_changed_event_cb(e,label),lv.EVENT.VALUE_CHANGED, None)

# Manually update the label for the first time
arc.send_event(lv.EVENT.VALUE_CHANGED, None)

Loader with Arc

#include "../../lv_examples.h"

#if LV_USE_ARC && LV_BUILD_EXAMPLES

static void set_angle(void * obj, int32_t v)
{
    lv_arc_set_value(obj, v);
}

/**
 * Create an arc which acts as a loader.
 */
void lv_example_arc_2(void)
{
    /*Create an Arc*/
    lv_obj_t * arc = lv_arc_create(lv_screen_active());
    lv_arc_set_rotation(arc, 270);
    lv_arc_set_bg_angles(arc, 0, 360);
    lv_obj_remove_style(arc, NULL, LV_PART_KNOB);   /*Be sure the knob is not displayed*/
    lv_obj_remove_flag(arc, LV_OBJ_FLAG_CLICKABLE);  /*To not allow adjusting by click*/
    lv_obj_center(arc);

    lv_anim_t a;
    lv_anim_init(&a);
    lv_anim_set_var(&a, arc);
    lv_anim_set_exec_cb(&a, set_angle);
    lv_anim_set_time(&a, 1000);
    lv_anim_set_repeat_count(&a, LV_ANIM_REPEAT_INFINITE);    /*Just for the demo*/
    lv_anim_set_repeat_delay(&a, 500);
    lv_anim_set_values(&a, 0, 100);
    lv_anim_start(&a);



}

#endif

def set_angle(obj, v):
    obj.set_value(v)

#
# Create an arc which acts as a loader.
#
# Create an Arc
arc = lv.arc(lv.screen_active())
arc.set_rotation(270)
arc.set_bg_angles(0, 360)
arc.remove_style(None, lv.PART.KNOB)   # Be sure the knob is not displayed
arc.remove_flag(lv.obj.FLAG.CLICKABLE)  #To not allow adjusting by click
arc.center()

a = lv.anim_t()
a.init()
a.set_var(arc)
a.set_time(1000)
a.set_repeat_count(lv.ANIM_REPEAT_INFINITE)    #Just for the demo
a.set_repeat_delay(500)
a.set_values(0, 100)
a.set_custom_exec_cb(lambda a,val: set_angle(arc,val))
lv.anim_t.start(a)

API

lv_arc.h .. Autogenerated

lv_arc.h